git push rejected: error: failed to push some refs

error: failed to push some refs to heroku
error: failed to push some refs to gitlab
error: failed to push some refs to bitbucket
git push --mirror error failed to push some refs to
git failed to push some refs updates were rejected
git error failed to push some refs to rejected
error: src refspec master does not match any error: failed to push some refs to
git failed to push some refs new branch

I know people have asked similar questions, but I believe the causes of their problems to be different. I did a hard reset because I had messed up my code pretty bad

 git reset --hard 41651df8fc9

I've made quite some changes, I've made some commits and now that I'm trying to push all these commits into the server I get the following error:

 ! [rejected]        master -> master (non-fast-forward)
error: failed to push some refs to 'git@git.somewhere.git'

Git suggests to do a git pull and that's what other people have suggested to other users. However, I believe that a git pull will merge my current code with the code that I don't want anymore (head revision). How can I do a push and forget about the version/revisions ahead of me?

git push -f if you have permission, but that will screw up anyone else who pulls from that repo, so be careful.

If that is denied, and you have access to the server, as canzar says below, you can allow this on the server with

git config receive.denyNonFastForwards false

git error: failed to push some refs to remote, If the GitHub repo has seen new commits pushed to it, while you were working locally, I would advise using: git pull --rebase git push. The full� [remote rejected] HEAD -> refs/for/master (change 14823 closed) error: failed to push some refs to 'ssh://xxxxx@gerrit.dev.xxxxx.net:29418/xxxxxx' any idea how i can fix this issue? git status says my branch is ahead of origin/master by 5 commits.

If you are the only the person working on the project, what you can do is:

 git checkout master
 git push origin +HEAD

This will set the tip of origin/master to the same commit as master (and so delete the commits between 41651df and origin/master)

git push rejected: error: failed to push some refs, git push -f if you have permission, but that will screw up anyone else who pulls from that repo, so be careful. If that is denied, and you have� For me, I use Git push to move code to my servers. I never change the code on the server side, so this is safe. In the repository, you are pushing to type: git config receive.denyCurrentBranch ignore This will allow you to change the repository while it's a working copy. After you run a Git push, go to the remote machine and type this: git

Just do

git pull origin [branch]

and then you should be able to push.

If you have commits on your own and didn't push it the branch yet, try

git pull --rebase origin [branch]

and then you should be able to push.

Read more about handling branches with Git.

Git failed to push some refs, [rejected] master -> master (non-fast-forward) error: failed to push some refs to 'git @github.com:salcode/myrepo.git' hint: Updates were rejected� git push Git says, “Whoa, hold on! I can’t add the dg34mp commit because there is an extra commit on the remote server we haven’t taken into account!” (a.k.a. I don’t know how to handle zyx911, “failed to push some refs”). What do we do? First, we make a backup copy of our master branch, in case something goes wrong.

'remote: error: denying non-fast-forward refs/heads/master (you should pull first)'

That message suggests that there is a hook on the server that is rejecting fast forward pushes. Yes, it is usually not recommended and is a good guard, but since you are the only person using it and you want to do the force push, contact the administrator of the repo to allow to do the non-fastforward push by temporarily removing the hook or giving you the permission in the hook to do so.

HOW TO FIX: error: failed to push some refs to, List of commands I use in the video~~ $ cd YourDirectory $ git init $ git remote add origin Duration: 2:33 Posted: Jun 20, 2018 Try this git command. git push origin master --force or short of force -f. git push origin master -f 👍 1273 👎 102 😄 147 🎉 163 😕 49 ️ 282 🚀 82 👀 31

What I did to solve the problem was:

git pull origin [branch]
git push origin [branch]

Also make sure that you are pointing to the right branch by running:

git remote set-url origin [url]

[rejected] failed to push to some refs � Issue #29 � rtyley/bfg-repo , [rejected] master -> master (fetch first) error: failed to push some refs to try changing git remote repo name by using git remote add origin� Although I’ve set my git --global user.email to the no-reply email adress which I fund in my github email preferences, I still get this error: $ git push origin readme-dev Counting objects: 8, done. Delta compression using up to 4 threads. Compressing objects: 100% (8/8), done. Writing objects: 100% (8/8), 984 bytes | 984.00 KiB/s, done. Total 8 (delta 6), reused 0 (delta 0) re

Solved: git push origin not working, error: failed to push some refs to 'ssh://git@bitbucket.org/niyamgiri/tribalrights.git'. To prevent you from losing history, non-fast-forward updates were rejected. By default, git push attempts to push every local branch with a matching remote branch. The error message stems from other locally-copied branches being out of date. In the above “error” message, you can see that the develop push actually worked correctly, only the push of the new_feature branch failed (as it should, as it’s out of date).

failed to push some refs to github, If the github repo is pushed with new changes and your local repo doesn't have that changes this error occurs for this you could use: git pull -�

error: failed to push some refs to 'git@github.com:abc70, [rejected] master -> master (non-fast-forward) error: failed to push some refs to 'git @github.com:abc70/new.git' hint: Updates were rejected�

Comments
  • I guess I don't have permission 'remote: error: denying non-fast-forward refs/heads/master (you should pull first)' I'm the only one working on this repo at the moment, so I'm not worried about any other branches or anything. Any ideas?
  • If you are the only person own this repo, just use git push -f, which will use your current repo replace the remote one. If there are multi users development, fast-forward is essential, otherwise, it will very easy happen distaste .
  • If you can log in on the remote, you can go right into the bare git repo and manually rewind the branch, with git branch -f, e.g., git branch -f rewind_the_one_I_broke 8120307 for example. You can run git log in a bare repo to find the reset-point. Note that this has the same effect as a git push -f but bypasses the hooks.
  • If you have access to the bare repository, you can temporarily update your repository configuration with git config receive.denyNonFastForwards false. I found mine was set to true by default.
  • @canzar the git config receive.denyNonFastForwards false is required for some of my git push --force commands to work. Thanks for the reference.
  • will this get rid of the code that I don't want anymore and keep my new code? (sorry if it's a dumb answer)
  • this will set the tip of origin/master to the same commit as master (and so delete the commits between 41651df and origin/master)
  • Update the origin repository’s master branch with the your current HEAD located branch, allowing non-fast-forward updates. So, this is the same with git push HEAD -f. For me, I think, you can use a more gentle way to do this, first, use git fetch, after that, use git rebase -i origin/master, this will let you select the commits.
  • AHHHH. SHOULD HAVE READ THE COMMENTS BEFORE RUNNING THE COMMAND.
  • fatal: Couldn't find remote ref [branch]
  • Or, have the admin run git branch -f, which has the same effect but does not require fussing about with the pre-receive hook.